Install the ShelfUpdated 7 months ago

Locate the 4 screws included with the shelf, and install them 75% of the way using the T20 Torx bit and the drill on a low setting or with a hand tool if you want to be extra careful. Overtightening can crack the shelf!

Once all 4 screws are installed about 75% of the way, fully tighten the Top right corner, then the bottom left corner, then the top left corner and finally the bottom right corner. 

Before using the shelf - TEST IT!

Lightly press down on the shelf, it should feel solid. Try lifting the shelf up gently. There should be no movement at all.

If your shelf is secure, install the aF4 - fan side facing out, drain drawer is accessible on the cutout on the bottom of the shelf.

Tip: If you'd like to be extra sure, test the shelf with a 6-10lb weight  overnight. After the test, there should be no movement in the shelf.  (we use a 15lb weight to test, so 6-10lbs is safe!)