The aF4 shelf is specifically designed to securely hold the aF4 when installed in 1/2" or thicker plywood. Gather the following tools before attempting to install your aF4 shelf:

The aF4 shelf is specifically designed to securely hold the aF4 when installed in 1/2&quot; or thicker plywood.<h2 id="while-completely-capable-of-being-installed-elsewhere-all-mounting-considerations-and-planning-falls-on-the-customer-when-not-installing-into-12-or-thicker-plywoodnote-the-af4-when-filled-with-slurry-will-weigh-approximately-6-lbsrequired-tools">While completely capable of being installed elsewhere, all mounting considerations and planning falls on the customer when not installing into 1/2&quot; or thicker plywood. Note: The aF4 when filled with slurry will weigh approximately 6 lbs! Required Tools</h2>Gather the following tools before attempting to install your aF4 shelf:<ol><li style="font-size: 16px;">Pencil for marking.</li><li style="font-size: 16px;">Level</li><li style="font-size: 16px;">T20 Torx Bit</li><li style="font-size: 16px;">Drill</li><li style="font-size: 16px;">9/64 Drill Bit</li></ol>

Installation Considerations and Required Tools

Using the shelf as a template, place it against the surface you would like to install.Place a level on the shelf or on the top edge of the shelf and make sure the shelf is level before marking the positions of the holes. Tip: If your intended install

Using the shelf as a template, place it against the surface you would like to install. Place a level on the shelf or on the top edge of the shelf and make sure the shelf is level before marking the positions of the holes.Tip: If your intended install location is an awkward to reach spot, you can make a template using paper. Place the paper behind the shelf, line up the top edge with the top of the shelf, and mark the four holes. Poke holes at the four marks and use the paper as the template. A level should still be used on the top edge of the paper to ensure level mounting. Using a 9/64&quot; drill bit, carefully drill pilot holes for the screws in each of the four marked locations.Tip: Mark the drill bit with a sharpie at a depth that will NOT punch through the thickness of the wood being used.

Prep the Installation Surface

Locate the 4 screws included with the shelf, and install them 75% of the way using the T20 Torx bit and the drill on a low setting or with a hand tool if you want to be extra careful. Overtightening can crack the shelf!Once all 4 screws are installed

Locate the 4 screws included with the shelf, and install them 75% of the way using the T20 Torx bit and the drill on a low setting or with a hand tool if you want to be extra careful. Overtightening can crack the shelf! Once all 4 screws are installed about 75% of the way, fully tighten the Top right corner, then the bottom left corner, then the top left corner and finally the bottom right corner.&#xA0;Before using the shelf - TEST IT! Lightly press down on the shelf, it should feel solid. Try lifting the shelf up gently. There should be no movement at all. If your shelf is secure, install the aF4 - fan side facing out, drain drawer is accessible on the cutout on the bottom of the shelf. Tip: If you&apos;d like to be extra sure, test the shelf with a 6-10lb weight &#xA0;overnight. After the test, there should be no movement in the shelf. &#xA0;(we use a 15lb weight to test, so 6-10lbs is safe!)

Install the Shelf

Leave your enquiry and we'll get back to you shortly.

Back to inD aquatics

inD aquatics

inD aquatics has developed a shelf for use inside of aquarium cabinets or other suitable locations.  This section contains the instructions for use and installation.

aF4 Shelf

Product Guides

aF4 Accessories

Getting Started Video

Unboxing

Pre-Use Rinse

aF4 Placement and Orientation Considerations

UI Programming:  Feed Time Setting

UI Programming: Feed Quantity

UI Programming: Temperature

UI Functions: Feed Now and Auto-Clean

Loading the aF4 and Food Preparation Techniques

Maintaining your aF4

aF4 Initial Setup

Food Prep Video Guide

RSW Technology: What is it?

Helpful Tools for Food Prep

Slurry Dilution Guide

aF4 Quick Load

aF4 Max Fill Instructions (50 Cubes!)

Maximum Duration Considerations

Sheet Food Preparation

Additive Use

21 Day Freshness Disclaimer

Tips and Tricks

aF4 Food Preparation Guide

aF4 - Automated Frozen Fish Food Feeder

aF4 Cleaning Video

aF4 Self Cleaning System

Auto-clean Function

Cleaning Tablets

Auto-Clean Setup

Auto-Clean Process

Cleaning Disclaimers

Deep Cleaning Guide

aF4 Maintenance

Connection

Adding the aF4 Output in Hydros™

Creating the aF4 Schedule in Hydros™

Manually Triggering a Feed Cycle in Hydros™

Hydros 0-10v Setup Video

Coralvue Hydros

0-10v aF4 Neptune Apex Setup Video

Identifying the Correct 0-10v Port

Basic Coding and Scheduling in Apex Fusion™

Manually Triggering a Feed Cycle in Apex Fusion™

Neptune Apex

1-10v Setup Guide

GHL Profilux

Smart Controller Setup (0-10v) Setup Guides

Techweave Sleeve Installation Video

inD connect Quick Start Guide

inD connect Siri Integration Guide

inD connect Alexa Integration Guide

inD connect Google Home Integration Guide

inD Connect

What do I do if my item(s) arrives damaged?

What if my package gets lost or arrives damaged?

Do you ship worldwide?

What is your shipping policy?

My order was marked delivered but it’s not here.

Shipping

How do I make a return?

How do I start a return?

When will I get my refund?

What’s your return policy?

Returns

Warranty Statement

Warranty / Repair Policy

Warranty Claim Instructions

inD aquatics Warranty

Can I edit or add anything to my order?

What is your cancellation policy?

Order Changes and Modifications

How much food does the aF4 hold?

How long can the aF4 keep food fresh?

Is it compatible with smart controller "X"? Neptune Apex, GHL Profilux, Coralvue Hydros...

Is it WiFi compatible? Do you have an APP?

How much power does it consume to operate?

I have a screen top on my aquarium, what size hole do I need to cut in it to accommodate the feeding tubes?

What are the temperatures for each setting on the aF4?

Brand new aF4: Not Feeding or no flow out of the gray tubing?

My aF4 is not powering on - there is a solid red light, but nothing happens when I press it.

My aF4 has a red blinking light.

Self Help and Troubleshooting