%20(1640%20x%20624%20px).png)
Depending on which port you have selected, you'll be using a different port in the Hydros app!. Coralvue has made this EXTREMELY simple for you by color coding the cables which correspond to outputs in the Hydros Application. For this guide, we're go
Power on an EMPTY aF4 and connect the 3.5mm cable to the 0-10v port on the aF4. The link icon on the top right portion of the aF4 should illuminate. For this example we're going to assume we used the black cable on the Coralvue 0-10v cable.1. Add a n
Add a new schedule:Type: Flow PatternPattern: Constant SpeedConstant Speed: 100%Reverse: OffPump Count: 1Pump 1: THIS IS THE OUTPUT YOU MADE IN SECTION 3ScheduleEnable Advanced Settings: NOStart Time: (Desired Feed Time)Run Time: (1:00 to 5:00 minute
Please let us know if there is a better way to do this - but the easiest way we've found is as follows:. 1. Go to the status page or output page.2. Select the output that controls the aF4 and switch it to max.3. Let it run for 15-20 seconds if you ar
Watch this short video for instructions on scheduling aF4 feeds with your Coralvue Hydros™. Output Settings. Output Device: 0-10v Output Runs Constantly: OFF Speed Limit: 99%-100% Voltage Range: 0.0V to 10.0V. Schedule Settings Type: Flow Pattern Pat